日本NITCHI電動葫蘆進行設置后需要如何檢查

日本NITCHI電動葫蘆作為進口起重機械，進行設置后一定要用心檢查，否則就是對生命的不負責任，那么設置后如何檢查呢？

1、檢查換臉日本NITCHI電動葫蘆的運螺栓、螺母與啟齒銷等組件有無脫落的情況，并檢查緊固件的緊固組裝程度是否充分；

2、檢車按鍵開關保護繩是否確實安裝，拉扯按鍵的開關保護繩是否受力；

3、日本NITCHI電動葫蘆電源與電纜是否固定在電纜支撐上；

4、日本NITCHI電動葫蘆電源電壓是不是正常，接地線是否正常連接。

上海祝融起重機械有限公司

聯系人：余小燕 18016070061/15216878467

電話：021-67866730

傳真：021-67715051

郵箱：15216878467@139.com

公司郵箱：zhurong@gks-cn.com 

地址：上海市松江區九亭鎮盛龍路751號5棟4層402室

郵編：201615

After Japan NITCHI electric hoist set need how to check

Japan NITCHI electric hoist as hoisting machinery imports, after setting must be carefully check, otherwise it is irresponsible for life, so after setting how to check?

1, check in face of Japan NITCHI electric hoist of bolt, nut, and announces the pin component have fall off, and check whether the degree of fastening assembly fasteners fully;

2, check whether the key switch protection rope actually installed, whether pull key switch protection rope force;

3, Japan NITCHI electric hoist the power with cable is fixed on the cable support;

4, Japan NITCHI electric hoist power supply voltage is normal, ground wire is normal connection.

Shanghai YuYing lifting Machinery Co., Ltd.

Atten: sunmer 18016070061/15216878467

Tel: 021-67866730

Fax: 021-67715051

E-mail: yyjixie@126.com

E-mail2: zhurong@gks-cn.com

Add: Shanghai city Songjiang District town Jiuting Shenglong Road No. 751 5#402

P.C: 201615

Web：www.yuying-lifting.com      

www.cnzhurong.com